JUKI LZ-2290C-F Instruction Manual page 73

Data
Item name
No.
S097 Multi-layered portion
changeover, number
of stitches to be
sewn before turning
OFF the changeover
function
S100 Tension correction
speed chart
* Refer to
"5-2-8. One-touch utility changeover function" p. 73
(2) Setting items for the polygonal-shape stitching steps
Data No. Item name
Step 01
S201 Step changeover
S203 Sensor value to change over the
step
S204 Number of stitches
(seam length in mm)
S205 Stitch length
(the number of stitches per inch,
the number of stitches per 3 cm)
S206 Reverse feed stitch length
S207 Needle thread tension, left
S208 Needle thread tension, right
S210 Stitch length 2
S211 Needle bar stop position at the
time of pause
Unit of
change
1 stitch
0 to 200
―
Unit of
change
―
1
1 stitch
0.1 mm
0.1 mm
1
1
0.1 mm
―
– 68 –
Input range
―
for the detailed function of one-touch changeover.
Input range
: Number of stitches
: One-touch switch
: Multi-layered part
1000 to 3000
1 to 10000
-5.0 to 5.0
-5.0 to 5.0
0 to 200
0 to 200
-5.0 to 5.0
：Stop with the needle up
：Stop with the needle down
―
0 to 200