Preparation; Parts And Hardware - Modern Flames OR30-MULTI-INT Owner's Manual

This product includes a GLASS panel. Always use extreme caution when handling
glass. Failure to do so could result in personal injury or property damage.
Remove all parts and hardware from the carton and place them on a clean, soft, dry surface. Parts
and assembly steps are grouped for wall-hanging or recessing use. Check the parts list to make
sure nothing is missing. Dispose of packaging materials properly. Please recycle whenever possible.
You will need the following tools (not included): Phillips screwdriver, stud finder, level, tape measure,
electric drill, 1/4" wood drill bit, hammer.
PART NO.
A
B
C
D

Preparation

Parts and Hardware

DESCRIPTION
Screws (Long)
Drywall Anchor
Screws (Short)
Remote Control
www.modernflames.com
PART NO.
E Wall Mount Bracket
F
G
H
DESCRIPTION
Crushed Glass
Driftwood Logs
Drywall Stop
5