Operation - Remote Control - Modern Flames OR30-MULTI-INT Owner's Manual

Button
ON: Enables control panel functions.
Turns on flame.
OFF: Disables control panel functions.
Turns off flame.
HOME BUTTON: Returns the fireplace
to the default color settings.
FLAME BUTTON: Cycles between
flame styles and colors.
ʌ: Cycles up between presets of
current flame styles.
v: Cycles down between presets of
current flame styles.
+: Increases flame speed of current
flame style and color.
--: Decrease flame speed of current
flame style and color.
NOTE: This fireplace has memory
function for flame.
AUDIO BUTTON: Raises and lowers
the audio from the fireplace.
DOWNLIGHT BUTTON: Cycles down
light colors.
NOTE: Downlight color effect stays on
until power button is turned off.
This fireplace has memory function for
down light settings.
DOWNLIGHT BRIGHTNESS BUTTON:
Makes downlight dimmer and brighter.
NOTE: LED down light brightness stays
on until power button is turned off.
Operation – Remote Control
Remote Control Operation
Function
www.modernflames.com
Action
1. Press once: Indicator light turns on. Power turns on. All
functions enabled.
2. Press again: Flame turns off. Unit goes to standby. All
functions turn off.
1. Press once: Flame video changes to flame style 1, color
yellow. Ember bed and down light changes to orange.
Flame speed changes to default and sound level changes
to low.
1. Press flame button once: Flame switches to next flame
style in the sequence
2. Press flame button again until desired style is reached.
In total, three flame styles.
Note: Press and hold for 5 seconds enables Wi-Fi pairing
mode
3. Press ʌ once: Changes up to the next preset of current
flame style.
4. Press ʌ again until desired preset is selected from
1C-2C-3C-4C-5C-6C.
5. Press v once: Changes down to the next preset of
current flame style.
6. Press v again until desired preset is selected from
6C-5C-4C-3C-2C-1C.
7. Press + button to increase the flame speed.
Displayed: 01-02-03.
8. Press button to decrease the flame speed.
Displayed: 03-02-01.
1. Press once: Changes the volume level.
2. Press again cycles between volume settings.
Volume settings:
S0 - Off
S1 - Low
S2 - Medium
S3 - High
1. Press once: Cycle downlight.
2. Press again until desired color is reached. In total ten
colors and one fade mode.01-02-03-04-05-06-07-08-09-10-
11-00 (off)
NOTE: Press and hold for 5 seconds to turn on night light
mode.
1. Press once: Brightness becomes active.
2. Press again until desired setting is reached. In total 5
levels.
From L4 - L3 - L2 - L1 - L0 (off)
23