Operation - Touch Control Panel - Modern Flames OR30-MULTI-INT Owner's Manual

Operation – Touch Control Panel
Button
ON: Enables control panel functions. Turns
on flame.
OFF: Disables control panel functions.
Turns off flame.
FLAME BUTTON: Changes between
flame presets.
NOTE: Color effect stays on until power
button is turned off.
NOTE: This fireplace has memory function
for flame presets.
HEATER BUTTON: Turns heater on and
off.
NOTE: The heater only works when the
flame is on. If the flame is off, the heater
will not turn on.
NOTE: To prevent overheating, the heater
fan will blow cool air for 8-10 seconds after
the heater turns off.
TIMER BUTTON: Controls timer settings
to turn off fireplace at selected time.
Settings range from 30 min to 8 hours.
Touch Panel Operation
Function
www.modernflames.com
Action
1. Press once: Indicator light turns on. Power turns
on. All functions enabled.
2. Press again: Flame turns off. Unit goes to standby.
All functions turn off.
3. Press & Hold for 5 seconds: Places fireplace in
remote paring mode. Displays P1 while pairing.
1. Press once: Flame color illuminates.
2. Press again until desired preset color is reached.
In total, three styles of flame with six colors for each
flame. 1C-2C-3C-4C-5C-6C
NOTE: Press and hold for 5 seconds to start
connecting with App.
1. Press once: Turns the heater and blower on.
2. Press again until it cycles thru the heater settings.
Settings:
H0 - Heater and blower off.
F – Fan only.
H1 - Low Heat.
H2 - High Heat.
NOTE: Press and hold the heater button for 5
seconds to lock/unlock the heater and thermostat. H0
will be displayed when locked.
1. Press once: Indicator light turns on. Timer defaults
to 0.5 hours.
2. Press again until desired setting is reached.
00(off)-30-1H-2H-3H-4H-5H-6H-7H-8H
22