Care - Cleaning; Care - Maintenance - Modern Flames OR30-MULTI-INT Owner's Manual

Always turn heater OFF and unplug power cord from the outlet before
cleaning, performing maintenance, or moving this fireplace. Failure to do so
could result in electric shock, fire, or personal injury.
Never immerse in water or spray with water. Doing so could result in electric
shock, fire, or personal injury.
:
Metal
 Clean using a soft cloth, slightly dampened with soapy water.
 DO NOT use a brass polish or household cleaners as these products will damage the metal trim.
:
Glass
Use an ammonia-free glass cleaner sprayed onto a cloth or towel. Dry thoroughly with a paper towel or

lint-free cloth.
 DO NOT use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
:
Vents
Use a vacuum or duster to remove dust and dirt from the heater and vent areas.

:
Plastic
Wipe gently with a slightly damp cloth and a mild solution of dish soap and warm water.

DO NOT use abrasive cleaners, liquid sprays, or any cleaner that could scratch the surface.

Risk of electric shock! Do not open any panels! No user-serviceable parts
inside!
Always turn the heater OFF and unplug power cord from the outlet before
cleaning, performing maintenance, or moving this fireplace. Failure to do so
could result in electric shock, fire, or personal injury.
Electrical and Moving Parts:
The fan motors are lubricated at the factory and do not require additional lubrication.

Electrical components are integrated into the fireplace and are not serviceable by the consumer.

Storage:
Store the fireplace in a clean, dry place when not in use.

WARNING! NO SERVICING of the internal or electrical parts should
be performed by the consumer.
Care – Cleaning
Care – Maintenance
www.modernflames.com
44