Lenovo ThinkSystem SD650 V3 User Manual page 186

Figure 186. Water loop screws installation
Step 12. Install the following screws to secure the quick connect.
• Two Torx T10 screws (per node) on the quick connect.
• Five Torx T10 screws (per node) on the rear of the node.
Figure 187. Quick connect screw installation
Step 13. Install the VR clamp plate into the node and install Torx T10 screws (2x Torx T10 screw per nods).
ThinkSystem SD650 V3 Neptune DWC Tray User Guide
178