Lenovo ThinkSystem SD650 V3 User Manual page 175

Figure 171. Folding the water loop
Step 9. Remove the processor from the retainer. This process differs by processor SKU. Check the
processor SKU and follow the applicable procedure.
Note: Do not touch the contacts on the processor.
For non Intel ®
1. Lift the handle to release the processor from the retainer.
2. Carefully hold the processor by its edges; then, lift the processor from the retainer.
Figure 172. Processor removal
For Intel ® Xeon
1. Insert a flat head screwdriver into the TIM breaking cam on the retainer; then, slightly rotate
the flat head screwdriver to release the processor from the retainer.
2. Carefully hold the processor by its edges; then, lift the processor from the retainer.
Xeon ® CPU Max processor
® CPU Max processor
.
Chapter 5 Hardware replacement procedures
167