Figure 176. Thermal grease application
Step 2.
Install processor retainers onto processors if needed.
a.
Align the triangular mark on the processor retainer with the triangular mark on the processor
corner edge.
b.
Gently place the processor retainer on the processor; then, carefully press the four sides of the
processor retainer to secure the processor.
Figure 177. Installing a processor retainer
Step 3.
Remove two plastic grease covers if needed.
a.
Use a pair of scissors to cut off the tape.
b.
Remove plastic grease covers from the underside of water loop cold plates.
ThinkSystem SD650 V3 Neptune DWC Tray User Guide
172