Intended use
2
Intended use
Remote alarm indicator and operator panels CP9xx display alarms, measured values and states of devices.
These include, for example:
• All Bender devices with BMS bus or BCOM interface
• Bender devices (PEM, energy meters,...) with Modbus RTU or Modbus TCP interface
• Other devices with Modbus RTU or Modbus TCP interface
In addition, the data is available via the Modbus TCP protocol. This allows coupling to a higher-level building
control system as well as visualisation and evaluation using standard web browsers.
Operation and settings are made via the COMTRAXX® user interface integrated in the device.
Any other use than that described in this manual is regarded as improper.
8
CP9xx_D00349_09_M_XXEN/03.2023