Bender COMTRAXX CP9 Series Manual page 14

Dimension diagram
a
COMTR X®
b c
Glass thickness: 3 mm
Mounting CP907
Flush-mounting enclosure CP907
Mounting of ush-mounting enclosures
The supplied ush-mounting enclosures are only suitable for mounting in cavity walls. In drywall and
stud frame constructions, the enclosures must be screwed at right angles to battens or to the stud frame
structure. The enclosure must not warp during mounting. The wall surface must be even.
Flush-mounting enclosure CP907, dimensions in mm
Tightening torque
The tightening torque for the mounting screws may be in a range between 0.8 ...1 Nm.
Surface-mounting enclosure CP907
14 CP9xx_D00349_09_M_XXEN/03.2023
Device dimensions
Type
CP907
CP915
CP924
Installation dimensions enclosure
Type Enclosure
Flush-
mounting
CP907
Surface-
mounting
Flush-
CP915
mounting
Flush-
CP924
mounting
Dimensions (mm) ±1
a b
226 144
505 350
654 441
Dimensions (mm)
a b
212 124
299 173
464 309
613 401
c
176 (7')
386 (15,6')
610 (24')
Required
installation
depth
75
---
92
95