Product Description; Intended Use - Bender COMTRAXX CP9 Series Manual

Customised alarm indicator and operator panel for medical locations and other areas

Hide thumbs Also See for COMTRAXX CP9 Series:

Table of Contents

Product description

2.1

The CP9xx-x alarm indicator and operator panels are intended for use in medical facilities as well

as industrial and single-purpose buildings.

They are used for:

• Display and visualisation of operating, warning and alarm messages

• Central control and parameter setting of BMS bus devices (BMS = Bender Measuring

Device Interface)

• Output of visual and acoustic warning messages

• Indication of measured values and setting of limit values for the purpose of measured

value monitoring of BMS-capable Bender monitoring systems, such as MEDICS®, RCMS

or EDS.

In addition, they are used for display, control and operation of:

• Operating theatre tables

• Supply systems for medical gases

• Air conditioning and ventilation systems

• Room lighting

• Communication systems

• Third-party systems

All technical devices installed in one alarm indicator and operator panel constitute a technical

centre in the respective room. Please heed the limits of the area of application indicated in the

technical specifications. Any other use than that described in this manual is regarded as improper.

Intended use implies:

• System-specific settings

• Observation of all information in the operating manual

• Compliance with test intervals

COMTRAXX® CP9xx-x – Control Panel

CP9xx-x_D00406_00_M_XXEN/04.2020

Table of Contents