Relay - Bender COMTRAXX CP9 Series Manual
Remote alarm indicator and operator panel for medical locations and other areas
Hide thumbs
Also See for COMTRAXX CP9 Series:
- Manual (44 pages) ,
- Quick start manual (8 pages) ,
- Quick start manual (8 pages)
Table of Contents
Advertisement
4.3
Relay
Connection relay
Commissioning of the CP9xx device
1.
Switch on the supply voltage:
After switching on, the device performs a start routine. It is completed when the commissioning page
appears on the display.
2.
Enter the desired IP address in the 1
3.
Enter the subnet mask in the 2
4.
Enter the address of the default gateway.
5.
Press the 'Save' button to store the entries.
6.
Wait 8...10 seconds. The COMTRAXX® system overview starts.
22
CP9xx_D00349_09_M_XXEN/03.2023
N/C operation contacts 11-12
N/C
(the alarm relay is energised during normal operation).
N/O operation contacts 11-14
N/O
(the alarm relay is de-energised during normal
operation).
st
line
nd
line
Advertisement
Table of Contents
