Table of Contents
Advertisement
Installation Planning
Framing Dimensions
WARNING
HeatShift System MUST be installed
on this appliance!
1/2" thick non-combustible
board required above,
on each side and below
engine opening (NOT supplied)
NOTE: This unit requires a
solid platform to support it.
Combustible framing allowed
appliance is installed directly
on carpeting, tile or other
combustible material other
appliance shall be installed
on a metal or wood panel
and recessed depth of the
appliance
NOTE: Height of cavity may be
- see page
page 20.
Framing
Between underside
of header and bottom
No hearth required.
If using a hearth,
see page
page 11.
13
Advertisement
Table of Contents
