Table of Contents
Advertisement
Installation
Rocks & Shale Set 1514RSS
Material required
• Black steel platform (supplied with appliance)
• Rock & Shale Set, which contains:
• 5 twigs
• 29 rocks (assorted colors)
• 1 bag of 3/4" grey/black shale
1
Overview
Installation
1. Carefully unpack the kit, as the logs are fragile.
2. Install the steel platform around the burner as
indicated. The openings in the platform should be
underneath.
Installed platform
50
2
3
x 29
3. Place the rocks around the burner, on the media
platform.
4. Place the fi rst twig #2 as shown, from on top of the
rear rocks, across the burner, to the media platform.
It should not rest directly on the burner.
2
IMPORTANT: All twigs installed in this kit should
be resting on the rocks, not the burner, as much as
possible.
5. Place the fi rst twig #1 as shown. Do not place it
directly on the burner.
2
Fuel Beds
1
Advertisement
Table of Contents
