Select Silicon Image Sata Raid In System Bios - SOLTEK 865Pro-FGR Manual

5-2 Select Silicon Image SATA RAID in System BIOS

Enter CMOS BIOS Setup and choose "Advanced BIOS Features" and
"Sil3114 Configuration". Choose either "IDE" or "RAID" to enable the
Onboard SATA-RAID interface.
IDE or RAID Mode Allows you to configure IDE or RAID mode on SATA
Sil3114 Configuration
IDE or RAID Mode
: : Move
General Help
Defaults
Attention: If IDE Mode is selected in the above BIOS setup, it means
SATA IDE interface is enabled and no RAID system can be configured
into the hard disks.
RAID Controller SIL3114.
Sil3114 Configuration
RAID Mode
Enter : Select +/- : Values
F7 : Previous Values
101
Chapter 5 RAID & Driver Setup
Help Item
F10: Save Esc: Exit
F8 : Fail-Safe Defaults
F1:
F9: Optimized