Table of Contents
Advertisement
865Pro-FGR
(9) Instantly, the "PCI Mass Storage Controller Properties" screen shows
up. Please click the "General" bar to continue.
(10) In the "General" screen, click "Reinstall
Driver" button to continue. Please note
that the status of "Device Usage"
should stay at "Exists in all hardware
profiles".
(11) In the "Update device Driver Wizard" screen, click "Next" to continue
until you see a dialog box asking you to "Specify a location" for the
driver. You should now insert the SATA Driver CD/Diskette into CD-
ROM/Drive A.
(12)Check the "Specify a location" on next creen and click the "Browse"
button to find out the correct path for the driver. As the RAID Driver
is in Drive A, please type into the blank bar the correct path and click
"Next" to continue.
(13) The Update Device Driver Wizard will then go on installing the
driver. In a few seconds, installation completes. Please click the "Fin-
ish" button on the screen to complete the installation.
56
Advertisement
Table of Contents
