2-3.2 Dual Channel Memory Features; 2-3.3 To Remove A Dimm - SOLTEK 865Pro-FGR Manual

2-3.2 Dual Channel Memory Features

• Dual Channel memory configuration provides higher performance than
Single Channel configurations
• Matched DIMMs need to have identical density, DRAM technology,
DRAM bus width, and equal number of memory banks.
• This series supports up to 4GB unbuffered Dual-channel DDR 400/
333/266 SDRAM, with 4 DDR DIMM slots on board. Do not insert
other type of modules into these slots.
• The dual memory controller can double the DDR memory bandwidth
up to 6.4GB/s with DDR400, 5.4GB/s with DDR333 and 4.2GB/s with
DDR266.

2-3.3 To Remove a DIMM

Power off the system first, and then press down the holding latches on
both sides of slot to release the module from the DIMM slot.
Chapter 2 Hardware Setup
23