Chapter 5 Raid & Driver Setup - SOLTEK 865Pro-FGR Manual

865Pro-FGR
Chapter 5 RAID & Driver Setup
Silicon Image SATA RAID and ITE RAID Controller
Silicon Image RAID (Redundant Array of Independent Disks) Controller
SIL3114 is built in this mainboard to provide RAID configuration of RAID
0, RAID 1, and RAID 0+1 modes. RAID Drivers are enclosed in a
Driver CD as well as a Floppy diskette to support various RAID systems
(Windows 98SE/ME/2000/XP) setup.
ITE RAID Controller IT8212F is built in this mainboard to provide RAID
configuration of Parallel IDE RAID 0, RAID 1, and RAID 0+1 modes.
RAID Drivers are enclosed in a Driver CD as well as a Floppy diskette
to support various RAID systems (Windows 98SE/Me/2000/XP) setup.
This Chapter is to introduce the SATA/SATA RAID
Configurations :
5-0 About Disk Array
5-1 Enable Silicon Image SATA RAID in System BIOS
5-2 Select Silicon Image SATA RAID in System BIOS
5-3 To Enter RAID BIOS Setup
5-4 Creating RAID set
5-5 Deleting RAID set
5-6 Finishing RAID set
5-7 To Install Sil3114 SATA/SATA RAID Driver
5-8 To Set up IT8212F with ITE RAID Interface
98