SOLTEK 865Pro-FGR Manual page 50

6. As illustrated in the picture below, check the item "Specify a location"
and click the "Browse" button to find out the correct path for the
driver. Supposing your CD-ROM drive is Drive E, please type:
E:\Driver\Network\Intel_LAN\GIGABPS\Win9x_me\Win_98me into
the blank bar. Then click the "Next" button to continue.
7. The Update Device Driver Wizard will then go on installing the driver,
until the "Insert Disk" dialog box shows up. Please withdraw your
Support CD and insert the Windows 98 CD-ROM into the CD-ROM
drive for updating system and click "OK" to continue.
8. The Update Device Driver Wizard will then proceed to update the
system with the LAN driver. When the "Finish" screen shows up,
click "Finish" to continue.
9. Final Dialog box will appear to remind you that you must restart your
computer to finish updating the new hardware. Please click "Yes" to
restart system and finish the LAN driver installation.
Enter the correct path for
the location of LAN driver
Finish
53
Chapter 3 Software Setup