IRQ Activity
IRQ can be set independently. Activity on any enabled IRQ will wake up
the system.
3.1.6 Load BIOS defaults
"LOAD BIOS DEFAULTS" indicates the most appropriate values for the
system parameters for minimum performance. These default values are
loaded automatically if the stored record created by the Setup program
becomes corrupted (and therefore unusable).
3.1.7 Load setup defaults
"LOAD SETUP DEFAULTS" loads the values required by the system for
maximum performance.
3.1.8 Password setting
To change, confirm, or disable the password, choose the "PASSWORD
SETTING" option form the Setup main menu and press [Enter]. The
password can be at most 8 characters long.
Remember, to enable this feature. You must first select the Security
Option in the BIOS FEATURES SETUP to be either "Setup" or "Sys-
tem."
3.1.9 IDE HDD auto detection
"IDE HDD auto detection" automatically self-detect for the correct hard
disk type.
3.1.10 Save & Exit setup
If you select this and press the [Enter] key, the values entered in the setup
utilities will be recorded in the CMOS memory of the chipset. The micro-
processor will check this every time you turn your system on and com-
pare this to what it finds as it checks the system. This record is required
for the system to operate.
3.1.11 Exit without saving
Selecting this option and pressing the [Enter] key lets you exit the Setup
program without recording any new values or changing old ones.
PCA-6145 User's Manual
34