This menu allows you to modify:
Display List Enable/Disable
Drawing CacheEnable/Disable
Use Acad 31 bit space?Yes/No
Internal Command EchoEnable/Disable
BP Zoom ModeFreeze/Float
Regen Mode Incremental/Fast
If your previously installed driver is not TurboDLD, you will have to
reconfigure the RENDER command the first time you use it.
5.3.3 Lotus 1-2-3 and Lotus Symphony
These drivers are designed to work with Lotus 1-2-3 versions 2.0, 2.01
and 2.2, and with Lotus Symphony versions 1.0 and 1.1.
Driver installation
Step 1: Place the display driver diskette into drive A. Make A the
default drive by typing A: <ENTER>. Run the SETUP program
by typing SETUP <ENTER>. Press any key to display a list of
supported applications. Use the arrow keys to select Lotus/
Symphony, and press <ENTER>. A list of supported screen res-
olutions will be displayed. Use the arrow keys to select the
desired screen resolution and press <ENTER>. (Make sure your
monitor is able to display the resolution desired) Press <END>
to begin the driver installation process. A default drive and
directory path will be displayed. Use the backspace key to erase
this default and type in the 123 directory. At this point you may
be asked to create the target directory if it does not already
exist. After the files have been installed, press any key to return
to the list of supported applications. Press <ESC> followed by
Y to exit to DOS. Copy all the files that were just created in the
temporary directory onto a formatted floppy diskette.
Step 2: Go to your 123 directory, and start the installation program.
Type the following commands:
C: <ENTER>
PCA-6145 User's Manual
48