Step 5: Follow the directions on the screen to complete the setup. In
most cases, you may press <ENTER> to accept the suggested
option. When Setup is done, it will return to DOS. Type WIN
<ENTER> to start Windows with the new display driver.
Changing Display Drivers in DOS
To change display drivers from DOS, change to the Windows directory
and run Setup, repeating steps 4 and 5 from the previous page. Besides
the special display drivers marked by an asterisk (*), you should be able
to use the following standard drivers:
VGA640x480, 16 colors
SuperVGA800x600, 16 colors
Panning Drivers
Special panning drivers are provided to allow high-resolution modes to
be displayed on a flat panel or CRT. These drivers will show a section of
a larger screen and will automatically pan, or scroll, the screen horizon-
tally and vertically when the mouse reaches the edge of the display.
Linear Acceleration Drivers
A special high-performance linear acceleration driver is provided for
256-color modes. This driver may require special hardware and may not
be supported on all systems. It is only available for Windows3.1.
5.3.2 AutoCAD R12
These drivers are designed to work with Autodesk AutoCAD R12. They
conform to the Autodesk Device Interface (ADI) for Rendering drivers
and Display drivers. These display list drivers accelerate redraw, pan, and
zoom functions.
Driver installation
Step 1: Place the display driver diskette in drive A. Type A: <ENTER>
to make this the default drive. Type SETUP <ENTER> to run
the SETUP program. Press any key to get to the applications
list. Using the arrow keys, select AutoCAD Release 12 and
press <ENTER>. This will display a list of supported driver res-
PCA-6145 User's Manual
46