Wordperfect - Advantech PCA-6145B Manual

tion process. A default drive and directory path will be dis-
played. Use the backspace key to erase this and type in your
Word directory. After the files have been installed, press any
key to return to the list of supported applications. Press <ESC>
followed by Y to exit to DOS.
Step 3: Copy the driver file for the desired resolution that was just
installed to SCREEN.VID.

5.4 WordPerfect

These drivers are designed to work with WordPerfect 5.0 or 5.1. They
support 132-column display in editing mode, and high-resolution graph-
ics display in PreView mode.
Driver installation
Step 1: Place the display driver diskette into drive A. Make A the
default drive by typing A: <ENTER>. Run the SETUP program
by typing SETUP <ENTER>. Press any key to display a list of
supported applications. Use the arrow keys to select WordPer-
fect and press <ENTER>. A list of supported screen resolutions
will be displayed. Use the arrow keys to select the desired
screen resolution and press <ENTER> (make sure your monitor
is able to display the resolution desired). Press <END> to begin
the driver installation process. A default drive and directory
path will be displayed. Use the backspace key to erase this
default and type in the WordPerfect directory. At this point you
may be asked to create the target directory if it does not already
exist. After the files have been installed, press any key to return
to the list of supported applications. Press <ESC> followed by
Y to exit to DOS.
Step 2: Start WordPerfect, and press <SHIFT>+<F1> to enter the setup
menu. Select D for Display and G for Graphics Screen Type,
and then choose the desired Chips VGA resolution.
51 Chapter 5