Chapter 5 SVGA Setup
The 65545 VGA BIOS supports monochrome LCD, EL, color TFT and
STN LCD flat panel displays. It also supports interlaced and non-inter-
laced analog monitors (VGA color and VGA monochrome) in high-reso-
lution modes while maintaining complete IBM VGA compatibility.
Digital monitors (i.e. MDA, CGA, and EGA) are NOT supported. Multi-
ple frequency (multisync) monitors are supported as analog monitors.
Both CRT and panel displays can be used simultaneously. The PCA-
6145B/PCA-6145L can be set in one of three configurations: on a CRT,
on a flat panel display, or on both simultaneously. The system is initially
set to simultaneous display mode. In the utility diskette, there are three
.COM files which can be used to select the display. Simply type the file-
name at the DOS prompt:
CT.COMEnables CRT display only
FP.COMEnables panel display only
SM.COMEnables both displays at the same time.
5.1 Sleep mode
The display driver diskette contains two files that support sleep mode.
Simply type the filename at the DOS prompt:
ON.COM switches to normal display mode.
OFF.COM switches to sleep mode.
PCA-6145 User's Manual
42