1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Single board computers
  5. PCE-3029
  6. User manual

Advantech PCE-3029 User Manual

Lga1151 intel xeon, core i7/i5/i3/celeron/pentium picmg 1.3 half-size system host board with vga / dvi-d /ddr4 / sata3.0 / usb3.0 / dual gbe
Hide thumbs Also See for PCE-3029:
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
PCE-3029/4129
®
LGA1151 Intel
Xeon, Core™ i7/
®
®
i5/i3/Celeron
/Pentium
PICMG
1.3 Half-size System Host Board
with VGA / DVI-D /DDR4 /
SATA3.0 / USB3.0 / Dual GbE

Advertisement

Table of Contents
loading

Related Manuals for Advantech PCE-3029

Summary of Contents for Advantech PCE-3029

  • Page 1 User Manual PCE-3029/4129 ® LGA1151 Intel Xeon, Core™ i7/ ® ® i5/i3/Celeron /Pentium PICMG 1.3 Half-size System Host Board with VGA / DVI-D /DDR4 / SATA3.0 / USB3.0 / Dual GbE...
  • Page 2 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
  • Page 3 Whether your new Advantech equipment is destined for the labo- ratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Advantech has come to be known.
  • Page 4 AQD-SD4U8GN21-SG 2133 DDR4 N PCE-3029/4129 AD4S2133W8G15-BSSD 2133 DDR4 N AQD-SD4U4GN21-SG 2133 DDR4 N AD4S2133W4G15-BSSD 2133 DDR4 N Note! PCE-3029 do not support ECC memory. Processor Support DDR4 Base Processor Cores/ memory Model Advantech P/N Freq. cache Treads speed Socket (GHz)
  • Page 5 PCE-3029G2-00A1E PCE-4129G2-00A1E Note! If PCE-3029/4129 is used on different backplanes which has different PCIe configuration. Below message would be showed on first time power on, and user has to turn off AC power and then turn on for PCIe re-configuration.
  • Page 6 It should be free of marks and scratches and in perfect working order upon receipt. As you unpack the PCE-3029/4129, check it for signs of shipping damage. (For example, damaged box, scratches, dents, etc.) If it is damaged or it fails to meet the specifications, notify our service department or your local sales representative immediately.

  • Page 7: Table Of Contents

    Table 1.2: Connectors ..............5 Board Layout: Jumper and Connector Locations........6 Figure 1.1 Jumper and connector locations......... 6 Block Diagram................... 7 Figure 1.2 PCE-3029 Block Diagram........... 7 Figure 1.3 PCE-4129 Block Diagram........... 7 Safety Precautions ..................8 Jumper Settings ..................8 1.8.1...
  • Page 8 Figure 3.32Save & Exit............... 58 Chapter Value-Added Software Services ..59 Value-Added Software Services ............. 60 4.1.1 Software API................60 Chapter Chipset Software Installation Utility Before You Begin..................62 Introduction ..................... 62 Windows 7/8.1/10 Driver Setup .............. 63 PCE-3029/4129 User Manual viii...
  • Page 9 Table B.7: Front Panel Connector (FP1) ........87 High-definition Audio Link Connector (HDAUD1)........88 Table B.8: High-definition Audio Link Connector (HDAUD1) ..88 LAN1 and LAN2 LED Connector (LANLED1) ......... 88 Table B.9: LAN1 and LAN2 LED Connector (LANLED1)... 88 PCE-3029/4129 User Manual...
  • Page 10 Table B.18:Interrupt Assignments ..........93 B.19 1 MB Memory Map.................. 94 Table B.19:1 MB memory map ........... 94 Appendix C Programming the GPIO ....95 Supported GPIO Register ............... 96 GPIO Registers..................96 GPIO Example Program-1 ..............96 PCE-3029/4129 User Manual...

  • Page 11: Chapter 1 Hardware Configuration

    Chapter Hardware Configuration...

  • Page 12: Introduction

    Introduction PCE-3029/4129 is a PICMG 1.3 half-size system host board which is designed with Intel® H110 (PCE-3029) or C236 (PCE-4129) PCH for industrial applications that 14nm manufacturing technology, LGA1151 socket Intel® Xeon or Core™ i7/i5/i3, Pentium® and Celeron® processors that integrate memory and graphic controllers and supports DDR4 2133 SDRAM up to 32 GB.

  • Page 13: Specifications

    BIOS: AMI SPI BIOS (128 Mb SPI)  System Chipset: Intel C236 (PCE-4129); Intel H110 (PCE-3029)  SATA hard disk drive interface: PCE-3029 supports three SATA 3.0 ports, and PCE-4129 supports four SATA 3.0 ports. Note! PCE-3029/4129 do NOT support PATA(IDE) interface.

  • Page 14: Graphics

    Supports single/dual 10/100/1000 Mbps Ethernet port(s) via the dedicated PCI Express x1 bus which provides 500 MB/s data transmission rate.  Controller: – LAN 1: Intel® I219V (PCE-3029) and I219LM (PCE-4129). – LAN 2: Intel® I211AT(PCE-3029) and I210AT (PCE-4129). 1.3.6 Industrial Features ...

  • Page 15: Jumpers And Connectors

    Jumpers and Connectors Connectors on the PCE-3029/4129 single host board link it to external devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers used to configure your system for your application.

  • Page 16: Board Layout: Jumper And Connector Locations

    SATA3 SATA2 PWR1 USB45 USB11 USB67 COM12 USB23 JWDT1 JOBS1 LAN LED1 USB1 LPT1 LPC1 LAN2 GPIO1 LAN1 LGA1151 JCOMS1 EXPCIE1 JME1 JCASE1 BIOS SPI1 VGA1 DVI1 KBMS1 PCH: C236 HDAUD1 Figure 1.1 Jumper and connector locations PCE-3029/4129 User Manual...

  • Page 17: Block Diagram

    2 x Pin header USB 3.0 USB 3.0 PCA-COM485/232 Module (Optional) 128 Mbit SPI Bus PCA-AUDIO-HDB1E (Optional) SPI ROM HD Audio Figure 1.2 PCE-3029 Block Diagram NXP PTN3355BS DDR4 1866/2133 up to 16GB (ECC) Display port (optional: PCE-SA01-00A1E) Intel Skylake LGA 1151 Processor...

  • Page 18: Safety Precautions

    1, 2 and 3. In this case you connect either pins 1 and 2, or 2 and 3. A pair of needle-nose pliers may be useful when set- ting jumpers. PCE-3029/4129 User Manual...

  • Page 19: Bios (Jcmos1)

    Watchdog Timer Output (JWDT1) and Hardware Monitor Alarm (JOBS1) PCE-3029/4129 contains a watchdog timer that will reset the CPU in the event the CPU stops processing. This feature means PCE-3029/4129 will recover from a soft- ware failure or an EMI problem. The JWDT1 jumper settings control the outcome of what the computer will do in the event the watchdog timer is tripped.

  • Page 20: System Memory

    4-5 closed * default setting System Memory PCE-3029/4129 has two 260-pin memory sockets for DDR4 1866/2133 MHz memory modules with maximum capacity of 32 GB. (Maximum16 GB for each DIMM) Note! Both of PCE-3029 and PCE-4129 do NOT support registered DIMMs (RDIMMs).

  • Page 21: Chapter 2 Connecting Peripherals

    Chapter Connecting Peripherals...

  • Page 22: Introduction

    Parallel Port (LPT1) LPT1 The parallel port is normally used to connect the motherboard to a printer. PCE-3029/ 4129 includes an onboard parallel port, accessed through a 26-pin flat-cable connec- tor, LPT1. PCE-3029/4129 User Manual...

  • Page 23: Usb Ports (Usb1, Usb23, Usb45, Usb67, Usb89, Usb11)

    USB Ports (USB1, USB23, USB45, USB67, USB89, USB11) PCE-3029/4129provides up to 10 x USB (Universal Serial Bus) on-board ports with complete Plug & Play and hot swap support. These USB ports comply with USB Specification 2.0 and 3.0, support transfer rates up to 480 Mbps (USB2.0), and 5 Gbps (USB3.0).

  • Page 24: Vga Connector (Vga1)

    This CPU card has VGA outputs that can drive conventional CRT displays. VGA1 is a standard 15-pin D-SUB connector commonly used for VGA. DVI Connector (DVI1) DVI1 DVI1 is a 20-pin connector, supporting resolution up to 1920 x 1200. Please place order no. 1700021831-01 for standard DVI connector on bracket. PCE-3029/4129 User Manual...

  • Page 25: Serial Ports (Com12)

    RS-232 Serial Ports (COM12) COM12 PCE-3029/4129 offers two serial ports. These ports can connect to serial devices, such as a mouse or a printer, or to a communications network. The IRQ and address ranges for both ports are fixed. However, if you want to disable the port or change these parameters later, you can do this in the system BIOS setup.

  • Page 26: Cpu Fan Connector (Cpufan1)

    CPU Fan Connector (CPUFAN1) This connector supports cooling fans of 500 mA (6 W) or less, and it also supports smart fan control when using 4-pin or 3-pin cooler. CPU FAN1 PCE-3029/4129 User Manual...

  • Page 27: Front Panel Connectors (Fp1)

    HDD LED, power LED, SNMP SM_Bus, reset, power on/off. Power LED status Power status Deep S5 ON Deep S5 OFF Deep S5 ON Deep S5 OFF Flash(fast) Flash(fast) Flash(fast) Flash(fast) Flash(fast) Flash(fast) Flash(fast) Flash(fast) Flash(slow) Flash(slow) Flash(slow) PCE-3029/4129 User Manual...

  • Page 28: H/W Monitor/Watchdog Timer

    4-5 Closed: Enables hardware monitor alarm (Default) 4-5 Open: Disables hardware monitor alarm 2.10.2 Watchdog timer (JWDT1) This is for an setting action trigger on the watchdog timer. 2-3 Close: Enable watchdog timer (Default) 2-3 Open: No action PCE-3029/4129 User Manual...

  • Page 29: Lan Ports (Lan1 & Lan2)

    LAN Ports (LAN1 & LAN2) LAN2 LAN1 PCE-3029/4129 is equipped with two high-performance 1000 Mbps Ethernet LANs. They are supported by all major network operating systems. The RJ-45 jacks on the rear plate provide convenient connectivity. Table 2.1: LAN LED Indicators...

  • Page 30: High Definition Audio Module Interface (Hdaud1)

    2.12 High Definition Audio Module Interface (HDAUD1) HDAUD1 This HDAUD1 pin header is the connection interface to Advantech's audio module. Note! Advantech audio module ordering information. P/N: PCA-AUDIO-HDB1E. PCE-3029/4129 User Manual...

  • Page 31: Gpio Header (Gpio1)

    Appendix C. 2.14 Case Open Connector (JCASE1) JCASE1 The 2-pin case open connector is for chassis with a case open sensor. When the case is open, the buzzer on motherboard will beep. PCE-3029/4129 User Manual...

  • Page 32: Front Panel Lan Indicator Connector (Lanled1)

    LAN1 (1,3 pin) LAN2 (2, 4 pin) 1000Mbps Link On 1000Mbps Active Flash Flash 1000Mbps Link Off 100Mbps Link On 100Mbps Active Flash Flash 100Mbps Link Off 10Mbps Link On 10Mbps Active Flash Flash 10Mbps Link Off PCE-3029/4129 User Manual...

  • Page 33: Serial Ata Interface (Sata0~Sata3)

    2.16 Serial ATA Interface (SATA0~SATA3) SATA0 SATA1 SATA3 SATA2 PCE-3029/4129 features high performance serial ATA 3.0 interface which eases cabling to hard drivers or CD/DVD drivers with long cables. PCE-3029/4129 User Manual...

  • Page 34: Lpc Extension Interface (Lpc1)

    2.17 LPC Extension Interface (LPC1) LPC1 LPC1 is a 14-pin female pinheader for adopting Advantech LPC module, such as PCA-COM232-00A1E, PCA-COM485-00A1E, PCA-TPM-00A1E. PCE-3029/4129 User Manual...

  • Page 35: 12/5V Power Connector (Pwr1)

    Due to no 5V supply from the golden fingers, please use a power converter: 1703040100 to connect from the peripheral power connector on the power supply to PWR1 on board. Note! Please note that if PWR1 is not connected, PCE-3029/4129can not be powered on. PCE-3029/4129 User Manual...

  • Page 36: M-Sata Or Mini-Pcie

    2.19 M-SATA or Mini-PCIe PCE-4129 provide a m-SATA interface with 600MB/s. If you need mini-PCIe device for PCE-4129, please contact with local sales or FAE for further T-part assistance. m-SATA PCE-3029/4129 User Manual...

  • Page 37: Ami Bios Setup

    Chapter AMI BIOS Setup...

  • Page 38: Introduction

    The Setup program uses a number of menus for making changes and turning the special features on or off. This chapter describes the basic navigation of the PCE-3029/4129 setup screens. Figure 3.1 Setup program initial screen...

  • Page 39: Entering Setup

    Press the <Tab> key or the <Arrow> keys to move between fields. The date must be entered in MM/DD/YY format. The time must be entered in HH:MM:SS format.  Power Type Choose this item correspond with your power supply type. PCE-3029/4129 User Manual...

  • Page 40: Advanced Bios Features Setup

    Advanced BIOS Setup option by highlighting it using the <Arrow> keys. All Advanced BIOS Setup options are described in this section. The Advanced BIOS Setup screen is shown below, and the sub menus are described on the following pages. Figure 3.3 Advanced BIOS features setup screen PCE-3029/4129 User Manual...
  • Page 41  Security Device Support Enable or disable BIOS for security device support. You can purchase Advan- tech TPM (Trust Platform Module) PCA-TPM-00A1E for your security device. Note! TCG EFI protocol and INTIA interface will not be available. PCE-3029/4129 User Manual...
  • Page 42 ACPI Sleep State Select S3 or disable suspend.  Lock Legacy Resources Enables or disables Lock Legacy Resources.  S3 Video Repost "Enable or Disable" S3 Video Repost.  PowerOn by Modem "Enabled" or "Disabled" PowerOn by Modem PCE-3029/4129 User Manual...
  • Page 43 Note! iAMT H/W is always enabled. This option controls the BIOS extension execution. If enabled, this requests additional firmware in the SPI device. PCE-3029 series product dont support Intel AMT function.  BIOS Hotkey Pressed Enable/Disable BIOS hotkey press. ...
  • Page 44  USB Configure Enable/Disable USB configure function.  PET Progress User can Enable/Disable PET events progress to receive PET events or note.  WatchDog Enable/Disable Watchdog Timer 3.2.2.4 PCH-FW Configuration Figure 3.7 Firmware Update Configuration PCE-3029/4129 User Manual...
  • Page 45  ME FW Image Re-Flash Enable/Disable ME FW Image Re-Flash function. 3.2.2.5 Smart Setting Figure 3.8 Smart Setting  Smart self test Run SMART self test on all HDDs during POST. PCE-3029/4129 User Manual...
  • Page 46 3.2.2.6 Super IO Configuration Figure 3.9 Super IO Configuration Figure 3.10 Serial Port 1 or 2 Configuration PCE-3029/4129 User Manual...
  • Page 47 Figure 3.11 Parallel Configuration  Serial Port 1 -2 configuration "Enable or Disable" serial port  Parallel Port configuration "Enable or Disable" parallel port PCE-3029/4129 User Manual...
  • Page 48 Use this to set the ACPI shutdown temperature threshold. When the system reaches the shutdown temperature, it will be automatically shut down by ACPI OS to protect the system from overheating damage.  CPUFAN1 Mode Setting Enable/Disable Smart Fan. PCE-3029/4129 User Manual...
  • Page 49 Wake System with Fixed Time Enable or disable system wake on alarm event. Select fixed time, system will wake on the hr:min:sec as specified. Select dynamic time, system will wake on the current time. Note! "+" increase minute(s) PCE-3029/4129 User Manual...
  • Page 50 Figure 3.14 Serial Port console redirection  COM1 – Console Redirection Settings Console Redirection Enable or Disable  Serial Port for Out-of-Band Management/ Windows Emergency Manage- ment services (EMS) – Console Redirection Console Redirection Enable or Disable PCE-3029/4129 User Manual...
  • Page 51 3.2.2.10 CPU Configuration Figure 3.15 CPU Configuration PCE-3029/4129 User Manual...
  • Page 52 Select the performance state that the BIOS will set before OS handoff.  Intel(R) Speedstep(tm) Allows more than two frequency ranges to be supported.  CPU C states Intel C states setting for power saving.  Intel TXT(LT) Support Enable or Disable Intel TXT support. PCE-3029/4129 User Manual...
  • Page 53 Figure 3.16 Platform Misc Configuration  Native PCIE Enable PCI Express Native Support Enable/Disable. This is only available in Vista.  Native ASPM On enable, Vista will control the ASPM support for the device. If disabled, the BIOS will. PCE-3029/4129 User Manual...
  • Page 54 3.2.2.12 SATA Configuration Figure 3.17 SATA Configuration  SATA Controller(s) Enable or disable SATA Device  SATA Mode This can be configured as AHCI and RAID PCE-3029/4129 User Manual...
  • Page 55 PCI-X Latency Timer Value to be programed into PCI-X atency Timer Register.  VGA Palette Snoop Enables/Disables VGA palette registers snooping.  Above 4G Decoding Enable / disable above 4G decoding  SR-IOV Support Enable / disable SR-IOV Support PCE-3029/4129 User Manual...
  • Page 56 Controls the execution of UEFI and Legacy Storage OpROM. – Video Controls the execution of UEFI and Legacy Video OpROM. – Other PCI devices Determines OpROM execution policy for devices other than Network, Stor- age, or Video. PCE-3029/4129 User Manual...
  • Page 57 Allows you to select the USB transfer time-out value. [1,5,10,20sec].  Device reset time-out Allows you to select the USB device reset time-out value. [1,5,10,20sec].  Device power-up delay This item appears only when you set device power-up delay item to [manual].  Mass Storage Devices PCE-3029/4129 User Manual...

  • Page 58: Chipset

    3.2.3 Chipset Figure 3.21 Chipset 3.2.3.1 System Agent (SA) Configuration Figure 3.22 System Agent (SA) Configuration  VT-d Check to enable VT-d function on MCH. PCE-3029/4129 User Manual...
  • Page 59 PCIE14/PCIE15 of D29: F0/ F1/ F2/ F3/ F4/ F5/ F6/ F7/, PCIE16/ PCIE17/ PCIE18/ PCIE19 of D27: F0/ F1/ F2/ F3, Graphics device should be primary PCIE.  Internal Graphics Keep IGD enabled based on the setup options. PCE-3029/4129 User Manual...
  • Page 60 Figure 3.23 Graphics Configuration  LCD Control Select Primary IGFX Boot Display (VBIOS Default, DP1, CRT, DP2). PCE-3029/4129 User Manual...
  • Page 61 PEG Port Configuration Figure 3.24 PEG Port Configuration  Enable Root Port Enable or disable the root port  Max Link speed Configure PEG 0:1:0 max speed  Detect Non-compliance device Detect Non-Compliance PCI express Device in PEG PCE-3029/4129 User Manual...
  • Page 62 3.2.3.4 Memory Configuration Figure 3.25 Memory Information  Maximum Memory Frequency Maximum memory frequency selections in Mhz. 3.2.3.5 PCH-IO Configuration Figure 3.26 PCH IO Configuration PCE-3029/4129 User Manual...
  • Page 63  High Precision Timer  Restore AC Power Loss Power Off, Power On or last state to restore AC power loss. 3.2.3.6 PCI Express Configuration Figure 3.27 PCI Express Configuration  PCI Express Root Port 1~20 status PCE-3029/4129 User Manual...
  • Page 64 Pre-condition work on USB host controller and root ports for faster enumeration.  XHCI Mode Select Smart auto, Auto, Enable, and Disable mode of operation of XHCI con- troller. Note! Smart auto setting remembers last setting, but auto mode does not. PCE-3029/4129 User Manual...
  • Page 65 3.2.3.8 HD Audio Configuration Figure 3.29 PCH Azalia Configuration  HD Audio Control detection of the HD Audio device. Disable=HDA will be unconditionally disabled. Enable=HDA will be unconditionally enabled. Auto=HDA will be enabled if present, disabled otherwise. PCE-3029/4129 User Manual...

  • Page 66: Security

    Security Figure 3.30 Security Select Security Setup from the PCE-3029/4129 setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection are described in this section. To access the sub menu for the following items, select the item and press <Enter>.

  • Page 67: Boot

    Select the keyboard Numlock state.  Quiet Boot Enable/Disable Quiet Boot option.  Boot Option Priorities Displays information about boot priority options of devices.  Hard Drive BBS Priorities Set the order of the legacy devices in this group. PCE-3029/4129 User Manual...

  • Page 68: Save & Exit

    Select this option to save user's configuration.  Restore User Defaults Select this option to restore BIOS to user's configuration. *When you make some critical changes, the system will still reboot even if you chose "Save changes and exit". PCE-3029/4129 User Manual...

  • Page 69: Value-Added Software Services

    Chapter Value-Added Software Services...

  • Page 70: Value-Added Software Services

    Advantech platforms. APIs plays the role of catalyst between developer and solution, and make Advantech embedded platforms easier and simpler to adopt and operate with customer applications.

  • Page 71: Chipset Software Installation Utility

    Chapter Chipset Software Installation Utility...

  • Page 72: Before You Begin

    To facilitate the installation of the enhanced display drivers and utility software, read the instructions in this chapter carefully. The drivers for the PCE-3029/4129 are located on the software installation CD. The driver in the folder of the driver CD will guide and link you to the utilities and drivers for Windows.

  • Page 73: Windows 7/8.1/10 Driver Setup

    Insert the driver CD into your system’s CD-ROM drive. You can see the driver folder items. Navigate to the "01_Chipset" folder, choosing the operating sys- tem, and click "infinst_autol.exe" to complete the installation of the driver. Note! Wrong driver installation may cause unexpected system instability. PCE-3029/4129 User Manual...
  • Page 74 PCE-3029/4129 User Manual...

  • Page 75: Chapter 6 Integrated Graphic Device Setup

    Chapter Integrated Graphic Device Setup...

  • Page 76: Introduction

    Insert the driver CD into your system’s CD-ROM drive. You can see the driver folder items. Navigate to the "02_Graphic" folder, choosing the operating system and click "setup.exe" to complete the installation of the driver. Note! Wrong driver installation may cause unexpected system instability. PCE-3029/4129 User Manual...

  • Page 77: Lan Configuration

    Chapter LAN Configuration...

  • Page 78: Introduction

    PCE-3029/4129 has dual Gigabit Ethernet LANs via dedicated PCI Express x1 lanes (For PCE-3029, LAN1 is Intel I219V, and LAN2 is I211AT; for PCE-4129, LAN1 is Intel I219LM, and LAN2 is I210AT) that offer bandwidth of up to 500 MB/sec, elimi- nating network data flow bottlenecks and incorporating Gigabit Ethernet at 1000 Mbps.

  • Page 79: Intel Me

    Chapter Intel ME...

  • Page 80: Introduction

    Note! If the Intel® Management Engine (Intel® ME) driver has not been suc- cessfully installed, you may see an error on a "PCI Simple Communica- tions Controller" in Device Manager. PCE-3029/4129 User Manual...

  • Page 81: Intel Usb 3.0

    Chapter Intel USB 3.0...

  • Page 82: Introduction

    Introduction PCE-3029/4129 provides Intel® USB 3.0 and the data transfer rates of USB 3.0 (5 Gbps) which is 10 times faster that USB 2.0 (480Mbps). Installation Insert the driver CD into your system’s CD-ROM drive. Navigate to the "05_USB3.0" folder and click "setup.exe" to complete the installation of the driver.

  • Page 83: Sata Raid Setup

    Chapter SATA RAID Setup...

  • Page 84: Introduction

    For the detailed installation instructions for the SATA RAID driver and utility, please check the User Guide in the driver CD. Note! Before you install the Intel Rapid Storage Technology, please read the "readme.txt". PCE-3029 don't support SATA RAID mode. PCE-3029/4129 User Manual...

  • Page 85: Appendix A Programming The Watchdog Timer

    Appendix Programming the Watchdog Timer...

  • Page 86: Introduction

    Introduction The PCE-3029/4129’s watchdog timer can be used to monitor system software oper- ation and take corrective action if the software fails to function within the programmed period. This section describes the operation of the watchdog timer and how to pro- gram it.
  • Page 87 Write 1 to bit 4: Watchdog timer count mode is 1000 times faster. If bit 3 is 0, the count mode is 1/1000 seconds mode. If bit 3 is 1, the count mode is 1/1000 minutes mode. PCE-3029/4129 User Manual...

  • Page 88: Example Program

    ; Enable the function of watchdog timer al,30h dx,al al,dx al,01h dx,al ;----------------------------------------------------------- Dec dx ; Set second as counting unit al,0f5h dx,al al,dx And al,not 08h dx,al ;----------------------------------------------------------- Dec dx ; Set timeout interval as 10 seconds and start counting al,0f6h PCE-3029/4129 User Manual...
  • Page 89 ;----------------------------------------------------------- Dec dx ; Set minute as counting unit al,0f5h dx,al al,dx al,08h dx,al ;----------------------------------------------------------- Dec dx ; Set timeout interval as 5 minutes and start counting al,0f6h dx,al al,5 ; 5 minutes dx,al ;----------------------------------------------------------- PCE-3029/4129 User Manual...
  • Page 90 ;----------------------------------------------------------- Dec dx ; Lock NCT6776D al,0aah dx,al Enable watchdog timer to be reset by keyboard ;----------------------------------------------------------- Mov dx,2eh ; Unlock NCT6776D Mov al,87h Out dx,al Out dx,al ;----------------------------------------------------------- Mov al,07h ; Select registers of watchdog timer PCE-3029/4129 User Manual...
  • Page 91 Out dx,al Out dx,al ;----------------------------------------------------------- Mov al,07h ; Select registers of watchdog timer dx,al al,08h dx,al ;----------------------------------------------------------- Dec dx ; Enable the function of watchdog timer al,30h dx,al al,01h dx,al ;----------------------------------------------------------- Dec dx ; Generate a time-out signal PCE-3029/4129 User Manual...
  • Page 92 ;Write 1 to bit 5 of F7 register al,dx Or al,20h dx,al ;----------------------------------------------------------- Dec dx ; Lock NCT6776D al,0aah dx,al PCE-3029/4129 User Manual...

  • Page 93: Appendix B I/O Pin Assignments

    Appendix I/O Pin Assignments...

  • Page 94: Parallel Port Connector (Lpt1)

    Parallel Port Connector (LPT1) Table B.1: Parallel Port Connector (LPT1) Signal Signal STROBE* AUTOFD* INIT* SLCTINI* ACK* BUSY SLCT * low active VGA Connector (VGA1) Table B.2: VGA Connector (VGA1) Signal Signal GREEN BLUE H-SYNC V-SYNC PCE-3029/4129 User Manual...

  • Page 95: Rs 232 Serial Port (Com12)

    RS 232 Serial Port (COM12) Table B.3: RS-232 Serial Port (COM12) Signal COM1_DCD COM1_DSR COM1_SIN COM1_RTS COM1_SOUT COM1_CTS COM1_DTR COM1_RI COM2_DCD COM2_DSR COM2_SIN COM2_RTS COM2_SOUT COM2_CTS COM2_DTR COM2_RI PCE-3029/4129 User Manual...

  • Page 96: Usb 3.0 Header (Usb23~Usb89)

    Table B.4: USB 3.0 Header (USB23~USB89) Signal Signal USB_P+_P2 USB3.0_RXN_P1 USB_P-_P2 USB3.0_RXP_P1 USB3.0_TXP_P2 USB3.0_TXN_P1 USB3.0_TXN_P2 USB3.0_TXP_P1 USB3.0_RXP_P2 USB_P-_P1 USB3.0_RXN_P2 USB_P+_P1 Reserve PS/2 Keyboard/Mouse Connector (KBMS1) Table B.5: PS/2 Keyboard/Mouse Connector (KBMS1) Signal KB DATA MS DATA KB CLOCK MS CLOCK PCE-3029/4129 User Manual...

  • Page 97: Cpu Fan Power Connector (Cpufan1)

    CPU Fan Power Connector (CPUFAN1) Table B.6: CPU Fan Power Connector (CPUFAN1) Signal +12V Detect Front Panel Connector (FP1) Table B.7: Front Panel Connector (FP1) Signal HDD_LED+ HDD_LED- PW_LED SNMP_SCL SNMP_SDA RESET# PWR-BTN PCE-3029/4129 User Manual...

  • Page 98: High-Definition Audio Link Connector (Hdaud1)

    High-definition Audio Link Connector (HDAUD1) Table B.8: High-definition Audio Link Connector (HDAUD1) Signal Signal ACZ_VCC ACZ_SYNC ACZ_BITCLK ACZ_SDOUT ACZ_SDIN0 ACZ_SDIN1 -ACZ_RST ACZ_12V LAN1 and LAN2 LED Connector (LANLED1) Table B.9: LAN1 and LAN2 LED Connector (LANLED1) Signal #LAN1_ACT #LAN2_ACT V33_AUX V33_AUX PCE-3029/4129 User Manual...
  • Page 99 B.10 GPIO Header (GPIO1) Table B.10: GPIO Header (GPIO1) Signal SIO_GPIO0 SIO_GPIO4 SIO_GPIO1 SIO_GPIO5 SIO_GPIO2 SIO_GPIO6 SIO_GPIO3 SIO_GPIO7 VCC_GPIO B.11 JWDT1 and JOBS1 Table B.11: JWDT1 and JOBS1 Signal SIO_WG# SRST# ERR_BEEP OBS_BEEP PCE-3029/4129 User Manual...
  • Page 100 B.12 JCASE1 Table B.12: JCASE1 Signal CASEOP# B.13 LPC1 Table B.13: LPC1 Signal CLK33M_LPC0 LPC_AD1 PLTRST_LPC0# LPC_AD0 LPC_FRAME# 3.3V LPC_AD3 LPC_AD2 LPC1_SMB_CLK PCI_SERIRQ LPC1_SMB_DATA 5VSB 5VSB PCE-3029/4129 User Manual...
  • Page 101 Table B.14: PWR1 Signal B.15 DP1, DVI1 Table B.15: DP1, DVI1 Signal DDPB TX0- B DDPB TX3- B DDPB TX0+ B DDPB TX3+ B DDPB TX1- B DDPB TX1+ B TMDS0_DDB_DAT(PCE-4128) DDPB_AUX- (PCE-3028) TMDS0_DDB_CLK (PCE-4128) DDPB_AUX+ (PCE-3028) PCE-3029/4129 User Manual...
  • Page 102 LPC/eSPI or PCIe 84h - 86h Reserved LPC/eSPI or PCIe LPC/eSPI or PCIe Reserved LPC/eSPI or PCIe LPC/eSPI or PCIe 8Ch - 8Eh Reserved LPC/eSPI or PCIe LPC/eSPI or PCIe (Alias to 80h) (Alias to 80h) Forwarded to LPC/eSPI PCE-3029/4129 User Manual...
  • Page 103 Interrupt Assignments Table B.18: Interrupt Assignments Interrupt# Interrupt source IRQ0 System timer IRQ1 Keyboard IRQ2 Interrupt from controller 2 (cascade) IRQ3 Communication port (COM2) IRQ4 Communication port (COM1) IRQ5 Available IRQ6 Not available IRQ7 IRQ8 System COMS/Real-time clock PCE-3029/4129 User Manual...
  • Page 104 B.19 1 MB Memory Map Table B.19: 1 MB memory map Address Range Device E8000h - FFFFFh BIOS D0000h - E7FFFh Unused C0000h - CFFFFh VGA BIOS A0000h - BFFFFh Video Memory 00000h - 9FFFFh Base memory PCE-3029/4129 User Manual...
  • Page 105 Appendix Programming the GPIO...
  • Page 106 MOV AL,87H OUT DX,AL OUT DX,AL --------------------------------------------------------------- Configure logical device, configuration register CRE0,CRE1,CRE2 --------------------------------------------------------------- MOV DX,2EH MOV AL,09H OUT DX,AC DEC DX MOV AL,30H OUT DX,AL INC DX IN AL,DX OR AL,10000000B DEC DX MOV AL,07H OUT DX,AL PCE-3029/4129 User Manual...
  • Page 107 ;Set GPIO is normal not inverter OUT DX,AL; DEC DX MOV AL,E1H OUT DX,AL INC DX MOV AL,??H ; Put the output value into AL OUT DX,AL ------------------------------------------ Exit extended function mode | ------------------------------------------ MOV DX,2EH MOV AL,AAH OUT DX,AL PCE-3029/4129 User Manual...
  • Page 108 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2016...

This manual is also suitable for:

Pce-4129

Table of Contents