Vga Display Software Configuration - Advantech PCA-6145B Manual

Half-size 486 all-in-one cpu card with panel/crt and ethernet interface

Hide thumbs Also See for PCA-6145B:

Table of Contents

45B-STN.BIN (512KB VRAM)

Support 640 x 480 color STN DD 8/16-bit displays

(Sharp LM64C142)

Note:

45B-MONO.BIN

Supports 640 x 480 dual scan monochrome displays

(Sharp LM64P8X/837)

45B-EL.BIN

Supports 640 x 480 EL displays (PLANAR EL640480-A Series)

CBROM.EXE

This program allows you to combine your own VGA BIOS with the Sys-

tem BIOS.

4.2 VGA Display Software Configuration

The PCA-6145B/PCA-6145L's on-board VGA interface supports a wide

range of popular LCD, EL, gas plasma flat panel displays and traditional

analog CRT monitors. The interface can drive CRT displays with resolu-

tions up to 1024 x 768 in 256 colors. It is also capable of driving color

panel displays with resolutions of 640 x 480 in 64K colors. The VGA

interface is configured completely via the software utility, so you don't

have to set any jumpers. Configure the VGA display as follows:

1. Apply power to the PCA-6145B/PCA-6145L with a color TFT dis-

play attached. This is the default setting for the PCA-6145B/PCA-

6145L. Ensure that the AWDFLASH.EXE and *.BIN files are located

in the working drive.

NOTE:

This BIOS does not support simultaneous CRT and

flat panel display with 512KB VRAM.

Ensure that you do not run AWDFLASH.EXE while

your system is operating in EMM386 mode.

Chapter 4

Table of Contents

Pca-6145l