Power Management
This option allows you to determine if the values in power manage-
ment are disabled, user-defined, or predefined.
HDD Power Management
You can choose to turn the HDD off after one of the time intervals
listed, or when the system is in Suspend mode. If in a power saving
mode, any access to the HDD will wake it up.
Note:
IRQ Activity
IRQ can be set independently. Activity on any enabled IRQ will wake
up the system.
5.1.6 PNP/PCI Configuration Setup
5.1.7 Load BIOS Defaults
"LOAD BIOS DEFAULTS" loads the most appropriate values of the
system parameters for minimum performance. These default values are
loaded automatically if the stored record created by the Setup program
becomes corrupt (and therefore unusable).
5 4
MIC-3357 User's Manual
The HDD will not power down if the Power Manage-
ment option is disabled.
Figure 5-6: PCI configuration screen