Table of Contents
Advertisement
olutions. Using the arrow keys and the <ENTER> key, select
the resolutions that are appropriate for your monitor. When all
of the desired resolutions have been selected, press <END> to
begin the installation. At this point you will be asked for a drive
and directory to copy the driver files. Enter the drive and direc-
tory that contains the installed AutoCAD R12. If the destination
directory does not exist you will be asked for confirmation.
When the installation is complete, press any key to continue.
Press <ESC> followed by Y to exit to DOS.
Step 2: Go to the AutoCAD directory where the new drivers were
installed and run the driver installation program by typing
ACAD12 -r <ENTER>. This program will configure your
AutoCAD R12 to use the new display drivers. Select Tur-
boDLD Classic.
Configuring TurboDLD
Select Configure Video Display. In Display Device Configuration choose
Select Graphics Board/Resolution. Then choose Select Display Graph-
ics Board. After choosing a graphics board, go to Select Display Reso-
lution. After selecting the display resolution, save the new configuration,
and return to the main menu.
Basic Configuration Menu
This menu allows you to modify:
Number of AutoCAD Command Lines
Font Size
Dual Screen Enable/Disable
User Interface Configuration
Double Click Interval Time
BP Button
BP HighlightPatt Line/Xor Rect/Both
BP Refresh Enable/Disable
BP Cache
Expert Configuration Menu
6x8/8x8/8x14/8x16/12x20/12x24
Enable/Disable
47
Chapter 5
Advertisement
Table of Contents
