Table of Contents
Advertisement
Changing Display Drivers in Windows
To change display drivers in Windows, select the Windows Setup icon
from the Main window. You will be shown the current setup configura-
tion. Select Change System Settings from the Option menu. Click on the
arrow at the end of the Display line. You will be shown a list of display
drivers. Click on the driver you want. Then click on the OK button. Fol-
low the directions to complete the setup.
Changing Color Schemes
After you change display drivers, you may notice that the color scheme
used by Windows looks strange. This is because different drivers have
different default colors. To change the color scheme, select the Control
Panel from the Main window. Select the Color icon. You will be shown
the current color scheme. Choose a new color scheme and click the OK
button.
DOS Setup
Step 1: Install Windows as you normally would for a VGA display.
Run Windows to make sure that it is working correctly. Then
exit Windows.
Step 2: Place the display driver diskette in drive A. Type A: <ENTER>
to make this the default drive. Type SETUP <ENTER> to run
the driver SETUP program. Press any key to get to the applica-
tions list. Using the arrow keys, select Windows Version 3.1
and press the <ENTER> key. Press the <ENTER> key to select
All Resolutions, and then press <END> to begin the installa-
tion. At this point you will be asked for the path to your Win-
dows System directory (default C:\WINDOWS). When the
installation is complete, press any key to continue. Press
<ESC> followed by Y to exit to DOS.
Step 3: Change to the directory where you installed Windows (usually
C:\WINDOWS).
Step 4: Type SETUP <ENTER> to run the Windows Setup program. It
will show the current Windows configuration. Use the up arrow
key to move to the Display line and press <ENTER>. A list of
display drivers will be shown. Use the arrow keys to select one
of the drivers starting with an asterisk (*) and press <ENTER>.
45
Chapter 5
Advertisement
Table of Contents
