Deleting Passwords - Epson ActionTower 8600 User Manual

or changing passwords
Entering
To specify a User password, you must first specify a Supervisor
password. Follow these steps to enter or change a password:
1. Select Set supervisor Password and press
2. You see a Set Supervisor Password window. Type a
password of up to seven characters and press
3. Type the same password a second time and press
see a message that your change has been saved.
4. Press the spacebar. The Supervisor Password option
displays Enabled.
To set a User password, select the set User Password
option as you follow

Deleting passwords

To delete your passwords, follow these steps:
1. Set the Password on Boot option to Disabled.
2.
Select set User Password and press
3. Delete
the
password field and
characters in these fields.
4. Delete the Supervisor password the same way.
Note
If you set both a User and Supervisor password, you must delete
the User password before you can access the Supervisor
password option.
B-14 Running SETUP and Installing Drivers
steps above.
the
User password by pressing
confirmation field. Don't type any
the
Enter.
Enter.
Enter. You
now
Enter.
for both the
Enter