Post-Installation Procedures - Epson ActionTower 8600 User Manual

7.
Make sure the pins in the processor are directly over the
holes in the socket. Then gently push the processor straight
into the socket, pressing evenly on all sides.
8.
Secure the processor by pressing the ZIF handle back to the
closed position.
9.
Change the setting of jumpers JP12, JP17, and JP29 for the
speed of your new processor; see "Changing the Jumper
Settings" for instructions.
10.
Be sure that jumper JP18 is set correctly for the processor's
voltage.
11.
Replace any option cards you removed; see "Installing an
Option Card" for instructions.
12.
Replace the computer's cover; see "Replacing the Cover."
Then see "Post-installation Procedures" for instructions on
configuring your computer with the new processor.

Post-installation Procedures

After you install or remove options such as SIMMs, video
memory, processor, or option cards, you must run SETUP so it
can automatically update the computer's configuration. You
may also want to customize any options associated with these
components. See Appendix B for instructions.
Additionally, you may need to add some commands to your
configuration files. See your operating system manual and the
manual that came with your optional equipment.
Installing and Removing Options 3-27