Deleting Passwords - Epson ActionPC 5000 User Manual

To specify a User password, you must first specify a Supervisor
password. Follow these steps to enter or change a Supervisor
password:
1. Select the Set Supervisor Password option and press
Enter.
2. You see a Set Supervisor Password window. Type the
password you want to use, then press Enter. You can define
a password of up to eight characters.
3. Type the same password a second time and press Enter. You
see a message that your changes have been saved.
Press the spacebar. The Supervisor Password option
4.
now displays Enabled.
To set a User password, select the Set User Password
option and follow the steps above.

Deleting passwords

To delete your passwords, follow these steps:
1. Set the Password on boot option to Disabled.
2. Delete the User password by pressing Enter for both the
password field and the confirmation field. Don't type any
characters in these fields.
3. Then delete the Supervisor password the same way.
Note
You must delete the User password before SETUP will allow
you to access the supervisor password
If you have forgotten your password, see "Password Problems"
in Chapter 6.
Running SETUP and Installing Drivers
I
2-11