Removing A Hard Disk Drive From The Mounting Bracket - Epson ActionTower 8600 User Manual

5. If you have finished installing or removing drives, replace
the computer's cover, as described under "Replacing the
Cover" in Chapter 3. Then see "Using the Fixed Disk Setup
Option" in Appendix B for instructions on defining your
new drive configuration.
Removing a Hard Disk Drive From the Mounting
Bracket
You may need to remove a hard disk drive for service or for
replacement.
Caution
Before you remove a hard disk drive, make sure you have
backup copies of all your files and programs. You can use
backup software or the backup utility in your operating system.
Refer to the online help files or software documentation for
instructions.
Follow these steps to remove a hard disk drive from the bracket:
1. Disconnect the cables from the back of the hard disk drive
and diskette drive in the bracket. Grasp the connectors and
pull them straight out so you do not bend the pins; do not
pull on the cables.
2. Remove the screws securing the bracket to the drive bay and
brace.
Installing and Removing Slimline Drives
4-13