Controller Problems - Epson ActionTower 8600 User Manual

Controller Problems

You see a controller error for the drive controllers or the l/O
port controllers when you start your system.
If the error message refers to an IDE (or HDD) controller or the
diskette drive controller, make sure that you have enabled the
controller in the SETUP program; see "Configuring integrated
peripherals" in Appendix B for more information.
If one of your hard disk drive controllers is faulty, try switching
to the other controller. You can then continue to use your system
until it is convenient for you to have it serviced.
Troubleshooting 6-17