Epson ActionTower 8600 User Manual page 88

8. Position the audio cable connector so that the tab faces up
and aligns with the notch in the CD-ROM drive's audio
connector. Then push in the connector.
audio
connector
9. If you installed a hard disk drive in one of the external bays,
replace the faceplate. Insert one side of the plate, then gently
press on the other side until it snaps into place.
10. Replace the internal mounting bracket and the drives it
contains. See "Replacing the Bracket in the Computer" for
instructions.
11. If you have finished installing or removing drives, replace
the computer's cover, as described under "Replacing the
Cover" in Chapter 3. Then see "Using the Fixed Disk Setup
Option" in Appendix B for instructions on defining your
new drive configuration.
Installing and Removing Slimline Drives
4-21