Epson ActionTower 8600 User Manual page 87

6. Align the notched corners of the power supply cable
connector with the notched corners of the drive's power
connector (such as the one shown below). Make sure the
holes fit over all the pins and then push in the connector.
7. If you are installing a CD-ROM drive, you need to connect
the audio cable; it has small plastic connectors at either end.
Follow the instructions that came with your sound card to
connect the audio cable to the card. If you need to install a
sound card first, follow the instructions under "Installing an
Option Card" in Chapter 3.
4-20 Installing and Removing Slimline Drives
notched corners