Removing The Drive Mounting Bracket - Epson ActionTower 8600 User Manual

Removing the Drive Mounting Bracket

Your computer has a 3.5-inch diskette drive, and it may have a
hard disk drive installed in a mounting bracket. In order to
install or remove any drives, you must first remove the drive
mounting bracket.
Follow these steps:
1. Remove the two cables from the diskette drive, as shown
below. Grasp the connectors and pull them straight out so
you do not bend the pins; do not pull on the cables.
2. Remove the two cables from the hard disk drive (if one is
installed).
and Removing Slimline Drives
4-4 Installing