Epson ActionTower 8600 User Manual page 23

3. Align the connector on the monitor cable with the VGA
monitor port on the computer. Then insert the connector into
the port.
Caution
To avoid damaging the connector, be careful not to bend the
pins when you insert it.
4.
If the connector has retaining screws, tighten them.
Caution
Before you plug the monitor's power cord into the back of
your computer, make sure the monitor's power
requirements do not exceed 2 Amps at 115 volts and 1 Amp
at 230 volts.
5.
Plug the monitor's power cord into the power inlet on the
back of the monitor.
6.
Plug the other end of the power cord into a grounded
electrical outlet or the computer's power outlet.
Setting Up Your System 1-5