Deleting Passwords - Epson ActionDesk 4000 User Manual

To specify a User password, you must first specify a Supervisor
password. Follow these steps to enter or change a Supervisor
password:
1. Select the Set Supervisor Password option and press
Enter.
2. You see a Set Supervisor Password window. Type the
password you
a password of up to eight characters.
3. Type
the
see a message that your
4. Press the spacebar. The Supervisor Password In
option now displays Enabled.
To set a User password, select the Set User Password
option and follow the steps above.

Deleting passwords

To delete your passwords, follow these steps:
1. Set the Password on boot option to Disabled.
2. Delete the User password by pressing
password field and the confirmation field. Don't type any
characters in these fields.
3. Then delete the Supervisor password the same way.
Note
You must delete the User password before SETUP will allow
you to access the Supervisor password.
If you have forgotten your password, see "Password Problems"
in Chapter 6.
want to use,
same password a second time and press
changes have been saved.
Running SETUP and Installing Drivers
then press Enter. You can
Enter
define
Enter. You
for both the
2-11