Installing The Drive - Epson ActionTower 8600 User Manual

2. As shown below, place a mounting frame on one side of the
drive and align it so that the oval holes in the frame are
positioned over the holes in the drive. Then secure the
mounting frame to the drive with the two screws.
3. Repeat step 2 to attach a mounting frame to the other side of
the drive.
lnstalling the Drive
Follow these steps to install a drive in the upper or lower
external drive bay:
1. Using a screwdriver, reach inside the back of the drive bay
and insert the screwdriver into one of the holes in the metal
plate covering the drive bay slot. Move the screwdriver up
and down until the plate loosens; then grasp the plate with
your hands and pull it out of the back of the drive bay.
Discard the plate; you do not need to reinstall it.
4-16 Installing and Removing Slimline Drives
f