24
Installing the Hood
Parts needed for this procedure:
6
Push-in fasteners
Procedure
1.
Align the holes in the hood with the holes in the
chassis of the machine
Figure 143
2.
Assemble the hood to the dash support with 2
push-in fasteners
Figure 144
1. Phillips pan-head screw
(1/4 x 1 inch)
2. Hood
3.
Secure the hood to the dash support
144) with 4 Phillips pan-head screws (1/4 x 1
inch).
4.
Assemble the bottom flange of the hood to the
machine with 4 push-in fasteners
(Figure
143).
(Figure
144).
3. Push-in fastener
(Figure
(Figure
1. Flange-head bolt (5/16 x
3/4 inch)
2. Flange (hood)
5.
Secure the flange to the machine
with 2 flange-head bolts (5/16 x 3/4 inch).
6.
Assemble the headlight connector of the
machine wire harness to the connector of the
headlight bulb
g298935
1. Connector (machine
harness—headlight)
7.
Repeat step
g298940
145).
59
Figure 145
3. Push-in fastener
(Figure
(Figure
146).
Figure 146
2. Connector (bulb)
6
at the other headlight.
g298937
145)
g298936