Table of Contents
Advertisement
Figure 114
1. 45° fitting (forward
pressure hose)
3.
Assemble the 45° fitting of the forward pressure
hose to the T-fitting of the hydraulic pump
(Figure
114).
4.
Tighten the hose fittings.
g314260
2. T-fitting (hydraulic pump)
20
Installing the Hoses
Parts needed for this procedure:
Hose 6 x 203 mm (1/4 x 8 inches); -6 (straight) and
1
-6 (45°) fittings
2
O-ring 12.4/1.8 mm (0.489/0.070 inch)
Hose 6 x 2819 mm (1/4 x 111 inches); -4 (90°) and
1
-6 (90°) fittings
Hose 6 x 673 mm (1/4 x 26-1/2 inches); -4 (straight)
1
and -6 (90°) fittings
Hose 6 x 711 mm (1/4 x 28 inches); -4 (straight) and
1
-6 (90°) fittings
Hose 10 x 187 mm (3/8 x 7-3/8 inches); -6 (straight)
1
and -8 (90°) fittings
Hose 10 x 264 mm (3/8 x 10-3/8 inches); -8 (90°) and
1
-6 (45°) fittings
2
O-ring 9.2/1.8 mm (0.364/0.070 inch)
Hose 6 x 1397 mm (1/4 x 55 inches); -6 (straight) and
1
-6 (90°) fittings
Hose 6 x 1270 mm (1/4 x 50 inches); -6 (straight) and
1
-6 (90°) fittings
Hose 10 x 2921 mm (3/8 x 115 inches); -8 (90°) and
1
-8 (90°) fittings
Hose 10 x 2921 mm (3/8 x 115 inches); -8 (90°) and
1
-6 (90°) fittings
1
O-ring 7.6/1.8 mm (0.301/0.070 inch)
3
Cable tie
Installing the Steering Valve Hoses
1.
Assemble the 45° fitting of the hose 6 x 203 mm
(1/4 x 8 inches) onto the port LS2 fitting of the
EHI steering valve
47
(Figure
115).
Advertisement
Table of Contents
