Remove The Negative Battery Cable; Replacing The Left Spindle - Toro 138-6246 Installation Instructions Manual

4
Remove the Negative
Battery Cable
No Parts Required
Procedure
1. Remove the cover from the battery box
2).
1. Cover
2. Remove the negative-battery cable from the
battery (Figure 2).
Figure 2
2. Negative battery cable
5

Replacing the Left Spindle

Parts needed for this procedure:
1 Left spindle
2 Bushing
1 Grease fitting
1 King pin
(Figure
2 Cotter pin (1-1/4 x 1/8 inches—from kit Model 41636)
1 Cotter pin (1-1/2 x 5/32 inch—from kit Model 41636)
Removing the Left, Front Wheel
1. Lift the machine and support it with jack stands;
refer to the Operator's Manual for your machine.
2. Remove the 5 wheel nuts that secure the left
tire and wheel to the wheel hub, and remove the
wheel from the machine
g292314
1. Wheel hub
2. Wheel nut
7
(Figure 3).
Figure 3
3. Tire and wheel
g299511