Table of Contents
Advertisement
1. Capscrew (8 x 20 mm)
2. Steering-cover sleeve
6.
Remove the 4 capscrews (8 x 20 mm) that
secure the steering valve to the steering plate,
and remove the valve from the plate
Note:
You no longer need the old steering
valve; retain the steering-cover sleeve and 4
capscrews.
13
Installing the Steering Valve
Parts needed for this procedure:
1
Steering valve
Assembling the Steering Valve
1.
Insert the shaft of the new steering valve through
the steering plate
Figure 50
3. Steering plate
4. Steering valve
(Figure
(Figure
51).
g299129
1. Capscrew (8 x 20 mm)
2. Steering-cover sleeve
2.
Align the fitting for port R to the
3 o'clock position
50).
1. Left side of the machine
3.
Secure the valve to the plate
the 4 capscrew (8 x 20 mm) that you removed in
Removing the Valve (page
4.
Assemble the steering-cover sleeve over the
steering valve
25
Figure 51
3. Steering valve
(Figure
52).
Figure 52
2. Fitting (port R—3 o'clock
position)
(Figure
23).
(Figure
51).
g299625
g300307
51) with
Advertisement
Table of Contents
