Presenting Through a Wireless Network
68
7. Click the AirPort icon on the menu bar at the top of the
Macintosh desktop. You see the AirPort status menu:
Choose the ESSID
you assigned to the
projector
8. Check to make sure AirPort is turned on.
9. Select your projector's ESSID.
Using Access Point Mode
To use Access Point (infrastructure) mode, first adjust your projector
and wireless access point or AirPort base station settings as described
in this section.
Configuring the Projector
1. Switch the projector to EasyMP and insert the Epson 802.11g
card (see page 60). You see this screen:
2. To select
, press the
Config
3. Highlight
under Wireless LAN and press
Basic
button on the remote control.
Enter
Enter
.