Transferring Your Scenario To A Memory Card - Epson PowerLite 835p User Manual

Transferring Your Scenario to a
Memory Card
Once your scenario is saved, you can transfer it to a memory card. You
can use any of the following standard Type II cards. Most require a
PC card adapter to allow insertion into the projector (check with your
computer dealer to purchase a PC card adapter).
™
■ CompactFlash
™
■ SmartMedia
ATA flash (does not require a PC card adapter)
■
Be sure to use the transfer process described below to ensure that the
scenario plays properly:
1. Insert the memory card in your computer's PCMCIA slot.
2. Start EMP SlideMaker 2 (see page 104).
3. Use the navigation tools in the folders window to locate the
scenario file you want to review. Click the file, then click
to open the scenario.
Open
4. From the Scenario Option(s) menu, choose
see a drive selection window:
5. Choose the drive where your card is located and click
6. Click again to confirm. Your scenario is transferred to the
OK
card.
■ Memory Stick
™
■ Microdrive
Send Scenario
Presenting from a Memory Card, Digital Camera, or External Drive
™
File >
. You
Select your memory
card drive
.
OK
note
You have to save the
scenario on your computer's
hard drive before
transferring it. Don't use
Windows to copy the
scenario to your memory
card, or it may not play
properly.
You must insert the memory
card in your computer's
PCMCIA slot before you
select from
Send Scenario
the Scenario Option(s)
menu. If you don't, you
won't be able to see the
card's drive in the drive
selection window. If this
happens, close and restart
EMP SlideMaker 2.
111