Presenting Through a Wireless Network
66
4. Click the
Advanced
5. Check your wireless card's or adapter's device settings.
(Depending on the type of card or adapter you're using, some of
the settings may be different than those listed here.)
Set the Network Type to
■
Set the SSID to match the name you assigned to the
■
projector's ESSID.
Make sure Encryption is
■
6. Click the
General
adapter is enabled.
7. When you're done, click
Now you're ready to connect to the projector. See "Projecting
Wirelessly" on page 83.
tab. You see a screen similar to this:
802.11 Ad Hoc
.
Disabled
tab and make sure that your wireless card or
to close the Properties dialog box.
OK
.