Epson PowerLite 835p User Manual page 27

Using Keystone Correction
To adjust your image when it is wider on one side, do the following:
■ Look at the shapes of the icons on the projector's four keystone
buttons. Press the button whose icon is the opposite of the shape
of your screen image. Continue pressing the button until you are
satisfied with the shape of the image.
Or press the
■
Menu
menu, and press
Setting
and press
Keystone
then select
Horiz./Vert./Height
(for vertical keystone distortion) or
V-Keystone
(for horizontal keystone distortion) and press
pointer button on the remote control to adjust the keystone
setting as needed.
button on the remote control, select the
. From the Setting menu, select
Enter
, select
Enter H/V Keystone
and press
Enter
Keystone
buttons
and press ,
Enter
. Select
H-Keystone
. Use the
Enter
Displaying and Adjusting the Image
note
The image will be slightly
smaller after adjusting. If
it's important to maintain
the correct aspect ratio, use
the menu system to perform
keystone correction, then use
the remote's button
Resize
to adjust the aspect ratio. See
page 123.
Menu
button
27