Controlling The Picture And Sound; Switching Between Picture Sources - Epson PowerLite 835p User Manual

note
You can use the projector's
menus to fine-tune the
picture and sound quality as
described on page 117.
Source buttons
Using the Remote Control
34

Controlling the Picture and Sound

You can use the remote control to preview and select your picture
sources, temporarily turn off the picture and sound, freeze the action,
zoom in on the picture, display a picture-in-picture image, and adjust
the volume.

Switching Between Picture Sources

If your projector is connected to more than one computer and/or
video source, you can switch between the different sources:
The easiest way to select your source is to press the
■
button on the remote control or projector repeatedly
Search
until you see the image you want on the screen.
■ On the projector's control panel, there are three
Press the
Source Search
image signals from connected devices, press the
Computer/Component
equipment connected to the
press the
Video/S-Video
connected to the
Video
■ On the remote control, there are five
to switch between equipment connected to the port identified on
each button, or to use EasyMP to project wirelessly or from a
memory card.
After you select a source, the screen goes dark for a moment before the
image appears.
button to automatically search for any
button to switch between EasyMP and
Computer/Component
button to switch between equipment
and ports.
S-Video
buttons. Use them
Source
Source
buttons:
Source
ports, or