Adding Wpa Security - Epson PowerLite 835p User Manual

For 64 bit WEP encryption with hexadecimal input, enter 10
■
characters, from 0 to 9 and from A to F.
For 128 bit WEP encryption with ASCII or text input, enter
■
13 alphanumeric characters.
For 64 bit WEP encryption with ASCII or text input, enter 5
■
alphanumeric characters.
6. When you're done making settings, highlight the
the top of the screen and press

Adding WPA Security

When you click the
Security
this screen:
1. Highlight and press
WPA
2. Highlight the
PSK
text box turns yellow to indicate you are in input mode. Press the
pointer button up to select individual letters in alphabetical
order, or down to select letters in reverse order; then press the
pointer button to the right to move to the next character
position. When done typing the key, press
3. When you're done making settings, highlight the
the top of the screen and press
.
Enter
button on the Network screen, you see
.
Enter
(pre-shared key) text box and press
.
Enter
button at
OK
. The
Enter
.
Enter
button at
OK
Presenting Through a Wireless Network
note
WPA is available on the
Macintosh only if the
wireless LAN on your
Mac supports WPA
authentication.
note
If you want to enter a blank
space, use the space character
that comes before the capital
letter A.
If you want to enter
numbers, press the
Num
button on the remote
control. The button lights up
to indicate that the numeric
keypad mode is active. Press
the button again to
Num
exit numeric keypad mode.
81